AMCap
kmod-i2c-core、
kmod-usb-video、
kmod-video-gspca-core、
kmod-video-gspca-zc3xx；
kmod-video-pwc
build_dir/target-mips_r2_uClibc-0.9.33.2/mjpg-streamer-r148/ipkg-ar71xx/mjpg-streamer/etc/config/mjpg-streamer
====================================
config mjpg-streamer core
option enabled “1”
option device “/dev/video0”
option resolution “640×480”
option fps “30”
option www “/www/webcam”
option port “8080”
======================================
加密码
vi /etc/init.d/mjpg-streamer
把
service_start /usr/bin/mjpg_streamer –input “input_uvc.so \
–device $device –fps $fps –resolution $resolution” \
–output “output_http.so –www $www –port $port”
改成
service_start /usr/bin/mjpg_streamer –input “input_uvc.so \
–device $device –fps $fps –resolution $resolution” \
–output “output_http.so –www $www -c test:123 –port $port”
用户名为test
密码为123
=======================================
存图，不能有密码
wget http://localhost:8081/?action=snapshot -O /tmp/s.jpg
mjpg_streamer –input “input_uvc.so –device /dev/video0 -r 6
40×480 -f 30” -o “output_file.so -f /tmp/”
=======================================
mjpg_streamer -i “input_uvc.so -r 640×480 -f 30” -o “output_http.so -p 8080 -w /www”
UVC需安装的软件
opkg install kmod-video-core kmod-video-uvc
启动命令
mjpg_streamer -i “input_uvc.so -r 352×288 -y -f 15 -q 80” -o “output_http.so -p 8080 -w /www”
把option enabled “0” 改成1